Description
4. For exact adjustment of the limit position, the
control unit will move the door in inching mode,
i.e., each time the OPEN/CLOSE buttons are
pressed, the control unit will only move the door
for approx. 50ms. This allows for exact adjustment
of the desired limit position.
5. Press the Stop button for 3 seconds in order to
save the limit position.
6. Travel to the desired OPEN limit position.
7. Press the Stop button for 3 seconds in order to
save the limit position.
8. For exact adjustment of the limit position, the
control unit will now move the door in inching
mode.
9. Press the Stop button for 3 seconds in order to
save the limit position.
12
To Next Page
Loading...
Need help?
General
