Safety instructions
The following safety instructions and warnings are intended to avert hazards and to
prevent property damage and personal injury. It is important to follow these instruc-
tions.
General information
• In addition to the fire and accident prevention regulations, the safety
instructions given in EN 12453, EN 12445, EN 12978, VDE 0100, EN
50110, EN 60204, EN 50178, EN 60335 and ASR A1.7 must be ob-
served.
• All work, including maintenance and cleaning, on electrical installa-
tions as well as other system parts must always be performed by
trained technicians, in particular qualified electricians.
• The limits given in the technical data must not be exceeded.
• The illustrations contained in these instructions are intended as an
aid to understanding how the product operates. Therefore, the illus-
trations may differ from the actual display on the product.
Caution
• When electrical or electronic equipment and units are
operated, certain components are live. Physical injuries
or damage to property can result in the event of unau-
thorised interventions or failure to heed warnings.
• When moving the doors in dead-man mode it is neces-
sary to ensure that the door region is visible to the oper-
ator, since safety equipment such as the safety edge of
the light barrier is not effective in this operating mode.
• Operating the control unit when the housing is open is
not allowed.
Attention
• Turning on or operating a control unit when dew is
present on the unit is not allowed. It can lead to the con-
trol unit being ruined.
4
To Next Page
Loading...
