Becker S30 - Page 21

Type S30, S30-V..
Secure functions
(EN ISO 13849-1:2008)
Safety edge: SE1 Category 2 / PL c
Light barrier with
testing
Category 2 / PL c
Emergency Stop Category 2 / PL c
Relay Changeover contact potential-free 0.5 A /
12 VDC
Humidity Up to 95%, non-condensing
Vibration Low-vibration installation, e.g., on a brick
wall
Assembly Vertical
Inputs (FE 1 – FE 6): typ. 12VDC / <10mA +/- 20%
All inputs must be connected potential-
free:
min. signal duration for input control com-
mands: > 100 ms
Safety chain / EMERGENCY STOP It is imperative that all inputs are connec-
ted potential-free
Contact load rating: 200mA / 30VDC
Safety input SE1 For electric safety edges with 8.2 kΩ / 1.2
kΩ terminating resistance and for dy-
namic optical systems
21