Product Description
2.2 Appropriate Use
The multi-touch built-in Control Panel CP29xx is designed for industrial application in machine and plant
engineering. A multi-touch display is accommodated in a stainless steel housing. The Control Panel is
installed in the front of control cabinets.
The DVI/USB extension technology integrated in the CP29xx Control Panel enables remote Panel
operation at a distance of up to 50 m from the PC via a standard cable.
Risk of explosion!
Danger
The Control Panel must not be used where there is a risk of explosion.
2.3 Access to the connectors
The connectors of the Control Panel are located at the rear side of the housing.
Picture: Bottom view
8 CP29xx
To Next Page
Loading...
