Product Description
2.2 Appropriate Use
The built-in Panel PC CP6606-0001-0020 is suitable for versatile use in PLC and Motion Control
applications in small and medium-sized machines, plants or buildings. A TFT display with touchscreen is
accommodated in a steel housing with aluminium front. The Panel PC is installed in the front of control
cabinets, for wall installation the wall mounting frame with order option C9900-M317 is necessary.
Risk of explosion!
Danger
The Panel PC must not be used where there is a risk of explosion.
2.3 Access to the connectors
The connectors of the Panel PC are located at the lower rear side of the housing.
Picture: Bottom view
8 CP6606-0001-0020
To Next Page
Loading...
Need help?
General
