Beckhoff CX2040 - Product Types

Product overview
2.4 Types
The CPU module can be equipped with different hardware and software options. The TwinCAT automation
software transforms a CX20x0 system into powerful PLC and Motion Control system that can be operated
with or without visualisation. Further system interfaces (preinstalled in the factory) or fieldbus connections
can be added to the basic CPU module.
The CX 20x0 modules are available in the following types:
Table 1: CX2020 (1,4 GHz 1 core)
Modul without
Operat
ingsys
tem
Microsoft
Windows
Embedded
Compact
Microsoft
Windows
Embedded7
(32bit)
Microsoft
Windows
Embedded7
(64bit)
without
TwinCAT
TwinCAT
PLC
Runtime
TwinCAT
NC PTP
Runtime
TwinCAT
NC I
Runtime
CX20200100 X    X   
CX20200110  X   X   
CX20200120   X  X   
CX20200130    X X   
CX20200111  X    X  
CX20200112  X     X 
CX20200113  X      X
CX20200121   X   X  
CX20200122   X    X 
CX20200123   X     X
CX20200131    X  X  
CX20200132    X   X 
CX20200133    X    X
Table 2: CX2030 (1,5 GHz 2 cores)
Modul without
Operat
ingsys
tem
Microsoft
Windows
Embedded
Compact
Microsoft
Windows
Embedded7
(32bit)
Microsoft
Windows
Embedded7
(64bit)
without
TwinCAT
TwinCAT
PLC
Runtime
TwinCAT
NC PTP
Runtime
TwinCAT
NC I
Runtime
CX20300100 X    X   
CX20300110  X   X   
CX20300120   X  X   
CX20300130    X X   
CX20300111  X    X  
CX20300112  X     X 
CX20300113  X      X
CX2020, CX2030, CX2040 13
Version 1.2