Operating/Configuration
CX50x050 Version: 1.9
Phoenix - AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
1. Ch0 M. Name Item Help
2. USB-HDD0 Name
.
.
.
n. Bootable Add-in Cards
Boot Priority [Dynamic]
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit [}45] F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
1. Ch0 M. / 2. USB-HDD0 / ... / n. Bootable Add-in Cards
This is where the boot sequence for the HDD setting is specified. Use <↑>, <↓>, <PU> and <PD> to change
the boot sequence.
Boot Proirity
This is were the list behaviour is set:
Dynamic: New devices are appended at the end of the list.
Manual: The priority list is stored and remains unchanged as long as no new devices are connected.
Fixed: The boot sequence is fixed: 1. HDD CHx master 2.HDD CHx slave 3. USB-HDD devices
4.3.3 Advanced Chipset Features
This menu is used for memory functions settings. Such settings should be implemented cautiously since they
can affect the stability of the whole system.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable [by SPD] Item Help
System BIOS Cachable [Enabled]
Video BIOS Cachable [Disabled]
** On-Chip VGA Setting **
On-Chip Video Memory Size [128 MB]
On-Chip Frame Buffer Size [8 MB]
Current Configuration DVO
Boot Type DVI
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit [}40] F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
To Next Page
Loading...
Need help?
General
