Product overview
CX50x0 13Version: 1.9
2.5 Types
The CPU module can be equipped with different hardware and software options: "Windows CE" or "Windows
Embedded Standard" are available as operating system. The TwinCAT automation software transforms a
CX50x0 system into powerful PLC and Motion Control system that can be operated with or without
visualisation. Further system interfaces (pre-installed in the factory) or fieldbus connections can be added to
the basic CPU module.
The CX 50x0 modules are available in the following types:
Table1: CX5010 (1.1 GHz)
Module E-Bus K-Bus no
operating
system
Windows
Embedded
CE 6
Windows
Embedded
Standard
2009
no
TwinCAT
TwinCAT 2
PLC
runtime
TwinCAT 2
NC-PTP
runtime
TwinCAT 3
XAR
CX5010-0100 X - X - - X - - -
CX5010-0110 X - - X - X - - -
CX5010-0111 X - - X - - X - -
CX5010-0112 X - - X - - X X -
CX5010-0115 X - - X - - - - X
CX5010-0120 X - - - X X - - -
CX5010-0121 X - - - X - X - -
CX5010-0122 X - - - X - X X -
CX5010-0125 X - - - X - - - X
CX5010-1100 - X X - - X - - -
CX5010-1110 - X - X - X - - -
CX5010-1111 - X - X - - X - -
CX5010-1112 - X - X - - X X -
CX5010-1115 - X - X - - - - X
CX5010-1120 - X - - X X - - -
CX5010-1121 - X - - X - X - -
CX5010-1122 - X - - X X X -
CX5010-1125 - X - - X - - - X
To Next Page
Loading...
Need help?
General
