Operating/Configuration
CX50x0 41Version: 1.9
A „►“ sign in front of the menu item indicates that a submenu is available. An "x" before a menu item
indicates that there is a setting option that has to be activated via a setting at a higher level.
Load Fail-Save Defaults
This option is used for absolute security settings. It is not suitable for continuous operation, but can be useful
if the PC malfunctions.
Load Optimized Defaults
This option is used for setting optimum values as recommended by the manufacturer.
Set Password
Here you can enter a setup password for preventing unauthorised invoking of the BIOS.
Save & Exit Setup
This option is used to save the settings and exit setup. Input: Y (Please note: enter Z with German
keyboard).
Exit Without Saving
Quit setup without saving the settings. Setting: Y (Please note: enter Z with German keyboard).
4.3.1 Standard CMOS Features
This menu is used for setting date, time, hard disks, graphics mode and start-up behaviour. At the same
time, information about the memory configuration determined by the system is provided. The memory
configuration information cannot be changed. The setting options for date, time, graphics mode and startup
behaviour are described below. A new menu opens for setting the hard disk data.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Jun 30 2010 Item Help
Time (hh:mm:ss) 11 : 11 : 00
υ8; IDE Channel 0 Master [}42]
[ None]
υ8; IDE Channel 0 Slave [}44]
[ None]
Halt On [All, But Keyboard]
Base Memory 639K
Extended Memory 514,048K
Total Memory 515,072K
↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit [}40] F1:Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Date (mm:dd:yy)
Options:
• mm … month
To Next Page
Loading...
Need help?
General
