Beckhoff CX5020 Series User Manual

Operating/Configuration
CX50x056 Version: 1.9
USB 1.0 Controller
The board contains a USB 1.0 chipset with support for USB 1.0. The option can be switched on or off here.
USB 2.0 Controller
The board contains a USB 2.0 chipset with support for USB 2.0. The option can be switched on or off here.
USB Operation Mode
Option for setting the data transfer rate of the USB port:
High Speed: Each device is connected based on the device-specific speed.
Full / Low Speed: All devices are connected with 1.5 MB/s or 12 MB/s.
USB Keyboard Function
The USB keyboard driver (if available) of the BIOS can be activated/deactivated here. This enables the USB
keyboard to be operated during and after system startup, if your operating system does not have a USB
driver.
USB Storage Function
Option for activating or deactivating USB mass storage support.
BeckhoffAutomation 2000
This function is intended only for internal purposes!

Beckhoff CX5020 Series Specifications

General

Brand	Beckhoff
Model	CX5020 Series
Category	Desktop
Language	English