Beckhoff EL2904 - 5.4.5 Entering a TwinSAFE address and parameters in the System Manager

Operation
EL290440 Version: 3.2.2
5.4.5 Entering a TwinSAFE address and parameters in the System
Manager
The FSoE address set at the DIP switch must also be entered under the FSoE tab (FSoE Address entry).
Fig.19: Entering the FSoE address
The EL2904 parameters are set under the respective TwinSAFE connection in the Connection and
Parameter tabs.
Fig.20: Setting the connection of the TwinSAFE connection