Maintenance and cleaning
EL2904 47Version: 3.2.2
7 Maintenance and cleaning
Cleaning by the manufacturer only
Do not operate the TwinSAFE component if it is unacceptably dirty. Refer to the technical data for
the protection class.
Send unacceptably dirty TwinSAFE component to the manufacturer for cleaning.
TwinSAFE components are basically maintenance-free.
7.1 Disassembly
Each TwinSAFE component is secured by a lock on the mounting rail.
To remove the TwinSAFE component, release the lock as follows:
1. Pull the orange strap [2] approx. 1cm out of the TwinSAFE component [1]
The mounting rail lock of the TwinSAFE component releases automatically.
2. Use your thumb and index finger to grip the unlocked TwinSAFE component [1] simultaneously at the top
and bottom of the housing surfaces
To Next Page
Loading...
Need help?
General
