Why system error, door locks for 45 minutes on Beckman Coulter Laboratory Equipment?
If your Beckman Coulter Laboratory Equipment displays a system error and the door locks for 45 minutes, it indicates a problem with the system control software. Wait 45 minutes, then press CE to clear the message and restart the run. If the problem continues, contact Beckman Coulter Field Service.
What causes rotor ID problem on Beckman Coulter Allegra X-14 Laboratory Equipment?
If you are experiencing a rotor ID problem with your Beckman Coulter Laboratory Equipment, it could be due to no magnets being identified, or magnets being incorrectly identified. Make sure the rotor in use is a compatible Beckman Coulter rotor and check that magnets are in place on the rotor bottom. Press CE to clear the message.
General| Brand | Beckman Coulter |
|---|---|
| Model | Allegra X-14 sERIES |
| Category | Laboratory Equipment |
| Language | English |
Introduces the Allegra X-14 Series centrifuges.
Explains the meaning of different alert symbols used in the manual.
Covers electrical, fire, mechanical, chemical, and biological safety precautions.
Describes the centrifuge's primary functions and applications.
Details the specific safety features incorporated into the centrifuge design.
Explains the function of each key used to set run parameters.
Lists detailed technical specifications of the centrifuge.
Lists compatible rotors with their specifications and manual numbers.
Details the step-by-step process for performing a manual centrifugation run.
Outlines the procedure for executing a programmed centrifugation run.
Describes how to select rotor acceleration and deceleration rates.
Provides instructions on how to initiate a centrifugation run.
Lists diagnostic codes, problems, results, and recommended actions.
A chart detailing common problems, their results, and recommended solutions.
Instructions for recovering samples during a power outage.
Details the manual door release mechanism for sample retrieval.
Specifies the necessary space, ventilation, and location criteria for installation.
Details the specific electrical connections and power requirements.
To Next Page