What to do if BECS BECSys3 115VAC Controller won't send a test text?
The BECSysRCM Controller will not send a test text message unless an alarm is generated. To send a test message, generate an alarm.
Why is my BECS BECSys3 115VAC Controller having problems using a flash drive?
If you are experiencing problems using a flash drive with your BECS Controller, the flash drive may be formatted using an incompatible file system. Ensure that the flash drive is formatted using either the FAT or FAT32 file system. To format the flash drive, right-click on it in Windows Explorer, select 'Format', choose either 'FAT' or 'FAT32', check the 'Quick Format' box, and click the 'Start' button.
General| Brand | BECS |
|---|---|
| Model | BECSys3 115VAC |
| Category | Controller |
| Language | English |
Warning about electrical hazards and disconnecting power before servicing.
Warnings regarding correct feeder connections for pH and Chlorine/Bromine outlets.
Notes indicating other warnings and cautions are present throughout the manual.
Covers installation, safety, firmware, environmental, and electrical specifications.
Lists NSF recommended operating ranges for ORP, pH, and Free Available Chlorine.
Lists operating ranges for standard and optional sensors like pH, ORP, and ppm.
Overview of controller options, entering program menu, language selection, and exiting.
Setting high/low alarm points and set points for pH, ORP, Temperature, and ppm.
Adjusting set points for pH, ORP, ppm, and configuring booster feed settings.
Methods for chlorine set point control and single-point sensor calibration.
Covers various alarms (pH, ORP, ppm, Temp, Flow, Failsafe) and how to reset them.
How to monitor controllers and download data logs using the BECSysRCM3.
Using a flash drive for data transfer and interpreting status LEDs.
Importing logs from a flash drive and viewing them with graph configuration.
Guidance on resolving probe errors and contacting distributors.
Addressing flash drive issues, including proper formatting (FAT/FAT32).
Performing a test message call-out, which requires an alarm condition to trigger.
Cleaning and long-term storage procedures for pH and ORP sensors.
Maintenance, cleaning, storage, and electrolyte refilling for the CCS140 sensor.
Charts for determining chemical amounts for spa water treatment.
Charts for determining chemical amounts for pool water treatment.
Schematic showing the installation of the BECSys controller with a pressure filter system.
Schematic showing the installation of the BECSys controller with a vacuum filter system.
Lists replacement parts for fuses, software, and various sensors.
Lists replacement parts for flow switches, flow cells, and common fittings.
Details the warranty period for controller electronics, flow cell, pH, and ORP sensors.
Outlines limitations, exclusions, and governing law for the BECS warranty.
To Next Page
