BECS BECSys7 230VAC - Section D: BECSys for Windows; D-1: System Requirements; D-2: Installation

Page 29
9487 Dielman Rock Island Ind Dr, St. Louis, MO 63132 www.becs.com
Operation and Maintenance Manual Rev: C17
Section D: BECSys for Windows
To ensure you receive the latest version of BECSys for Windows, please download the software by entering the
following web address in a web browser:
http://dnld.becsys.com
D – 1: System Requirements
Windows XP
Windows Vista
Windows 7
Windows 8
Windows 10
D – 2: Installation
You MUST be an Administrator to install
BECSys for Windows.
1) Enter the following web address in a web
browser: http://dnld.becsys.com
2) Under the “Downloads” section, click on the
link listed below “BECSys for Windows” and
save it to your local drive in a location you can
find later.
3) After downloading the file, locate the file on
your local drive.
4) Double click on the file.
5) Follow the prompts to install BECSys for
Windows.
6) Once it is finished installing you must reboot
the computer before using the program.
After installing BECSys for Windows, a shortcut to
the manual is located in the start menu under the All
Programs
BECSys for Windows group. This will
walk you through the steps to create a site.