EasyManua.ls Logo

Beem 05015 - Page 38

Beem 05015
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 38
Descaling
Limescale deposits have an adverse effect not only on the quality of the coffee and the water,
but they also cause power losses and shorten the lifespan of the device. The thicker a limescale
layer is, the more dif cult it is to remove.
We therefore recommend regularly removing limescale deposits with a descaling agent in
accordance with the water quality in your area and how often the device is used (approx. every
2 – 6 weeks).
The rst indications that descaling is required are a large amount of steam being produced and
slower brewing of the coffee.
For descaling we recommend the BEEM Premium Descaler Concentrate. The ef cient, food-
safe and environmentally friendly BEEM Premium Descaler Concentrate is available from selected
specialist stockists, via our website www.beem.de or from our customer service department on
request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water tank (h) up to the MAX marking with a concentrate / water solution of no
more than 1:20 (one part concentrate to 20 parts water).
2. Switch on the device by touching the eld
(4). The other operating elds light up and
ash. The device starts the heating process. As soon as all operating elds are permanently
lit, the device is preheated.
3. Insert the porta lter (d) into the device (see the “Handling and Operation” chapter –
Inserting the Porta lter into the Device”).
4. Place a suitable vessel under the porta lter.
5. Start the brewing process by touching the eld
(2). The device starts the brewing process,
and water runs through the porta lter into the cup.
6. Allow roughly a third of the solution to run through and then touch the eld
again.
7. Allow the descaling solution to take effect for a little while.
8. After around 30 minutes, touch the eld
again and allow the rest of the solution to run
through.
9. Rinse the water tank thoroughly and to rinse the device allow two tankfuls of clear water to
run through it.
10. Rinse all detachable parts thoroughly with clear water. The device is now descaled and
ready to be used again.

Table of Contents

Related product manuals