Content ........................................................................................................Page
1.0 Introduction ..............................................................................................4
1.1 Model and Type ........................................................................................4
1.2 Product description ..................................................................................4
2.0 Transport and Storage ..............................................................................5
3.0 Safety Measures ......................................................................................5
3.1 Appropriate Usage ..................................................................................6
4.0 Display and Control Elements ..................................................................7
4.1 Display......................................................................................................7
4.2 Operation Elements ..................................................................................8
5.0 Carrying out Measurements......................................................................9
5.1 Voltage Measurement ..............................................................................10
5.2 Low-Ohm Resistance Measurement ........................................................11
5.3 Insulation Measurement ..........................................................................13
5.4 Mains Internal Resistance Measurement / SCC Measurement ..................15
5.5 Loop Impedance Measurement / PSCCurrent Measurement ....................18
5.6 Loop Impedance Measurement without RCD Tripping ..............................20
5.7 General Information about RCD Tests ......................................................21
5.7.1 RCD – Measurement of Contact Voltage UB and the
Earthing Resistance RE without RCD Tripping ..........................................22
5.7.2 RCD Trip Time Test, Contact Voltage (ta, VB / RE) ....................................24
5.7.3 RCD Test with Rising Residual Current, Trip Current (I, ta/VC ..................27
5.8 Rotary Field Test ......................................................................................29
6.0 Storing, Printing, and Data Transfer ..........................................................30
6.1 Storing Measurement Data ......................................................................30
6.2 Viewing Measurement Data ....................................................................31
6.3 Printing Measurement Data ....................................................................32
6.4 Deleting Saved Measurement Data/View the Memory Location Number ..32
6.5 Delete all Saved Measurement Values ......................................................32
6.6 Infrared Interface, send Measurement Data ..............................................32
7.0 Displays / Error Messages ........................................................................33
8.0 Energy Management ................................................................................36
9.0 Maintenance ............................................................................................36
9.1 Cleaning....................................................................................................36
10.0 Battery Replacement ................................................................................36
11.0 Built in fuses ............................................................................................38
11.1 Display for Tripped Fuses ..........................................................................38
12.0 Calibration Interval....................................................................................38
13.0 Technical Data ..........................................................................................39
24 month Warranty ..................................................................................43
3
To Next Page
Loading...
Need help?
General
