7.0 Displays / Error Messages
33
Displays / Error Messages
Functions Message Cause
All
All
All
is blinking
All
M
All Functions
All Functions
Vac
Vac
Vdc
Vdc
Rins
Rins
Low Ω
Low Ω
Rins
Low Ω
Batteries are virtually empty and have to be replaced.
Measurement results no longer comply with the specifications.
Batteries are empty. No function of the Telaris
TELARIS is ready for measurement.
TELARIS is active (active measurement).
Overflow, voltage present exceeds 440 VAC
Overflow, voltage present exceeds 440 VDC
Overflow, voltage present falls below -440V DC
Insulation resistance exceeds or is greater than 199,99MOhm
Selected voltage is 500V
Test lead resistance has been compensated.
External voltage present, measurement may not be carried out.
Low ohm resistance higher than 1999 Ohm
Frequency of AC voltage outside range 10.0 ... 99,9Hz
Minimum one measurement result has been stored in memory.
Test leads are short curcuited or
PE test leads are connected to one of
the other test leads
Selected test voltage is 250 V
Attention symbol for exceeding limit values
To Next Page
Loading...
Need help?
General
