The UNITEST TELARIS 0100 plus is characterised
by the following features:
• Measurement of loop resistance and prospective
short circuit current measurement without trip-
ping the RCD
• Line resistance measurement up to 440 V
• Prospective short circuit current measurement
• RCD measurements (contact voltage, trip time,
trip current - ramp method)
• Low Ohm measurement
• Insulation measurement with 100, 250 500 V
• Voltage and frequency measurement
• Rotary field test
• Integrated socket test with contact electrode to
enable the user to quickly establish incorrectly in-
stalled sockets and/or protective conductor failu-
res
• Integrated memory for approx. 500 measurement
values
• Standard, built-in IR RS-232 interface for trans-
ferring measurement data to the PC
• Clear and large LCD providing the user with an op-
timum visual indication of both test values and li-
mits
• Auto power off
Scope of Supply
1 pc. UNITEST TELARIS 0100 plus
3 pc. Measurement leads
1 Three-pole test lead with safety plug
3 pcs Croccodile clamps
3 pcs Test probe
6 pcs Battery 1.5V, type IEC LR6 (Size AA)
1 pc Protective Holster
1 pc Carrying Case
1 pc Instruction manual
2.0 Transport and Storage
Please keep the original packaging for later trans-
port, e.g. for calibration. Any transport damage due
to faulty packaging will be excluded from warranty
claims.
In order to avoid instrument damage, we recom-
mend that accumulators are removed when not
using the instrument over a certain period of time.
However, should the instrument be contaminated
by leaking batteries cells, you are kindly requested
to return it to the factory for cleaning and inspec-
tion.
Instruments must be stored in dry and closed areas.
In the case of an instrument being transported in ex-
treme temperatures, a recovery time of at least 2
hours is required prior to instrument operation.
3.0 Safety Measures
The UNITEST Telaris 0100 plus has been designed
and checked in accordance with the safety regula-
tions for Electronic test and Measurement Instru-
ments EN 61010 and IEC 61010, and left our fac-
tory in a safe and perfect condition.
The instruction manual contains information
and references necessary for safe operation
and maintenance of the instrument.
The respective accident prevention regulations
established by the professional association for
electrical systems and equipment must be
strictly met at all times.
5
Transport and Storage/Safety Measures
To Next Page
Loading...
Need help?
General
