Switch off the instrument via the rotary switch and
disconnect the instrument from the connected
measurement circuits.
Remove holster
Loosen the screws on the rear of the instrument
Lift the battery case cover (by gently hitting the in-
strument in the palm of your hand).
Remove the discharged batteries.
Insert new batteries and ensure there is correct
polarity.
Replace the battery case cover and retighten the
screws.
The instrument is now ready for further measu-
rements.
Please consider your environment when you
dispose of your used batteries or accumula-
tors. They belong in a rubbish dump for haz-
ardous waste. In most cases, the batteries
can be returned to their point of sale.
Please, comply with the appropriate regulations
concerning the return, recycling and disposal of
used batteries.
If an instrument is not used over an extended pe-
riod of time, the batteries must be removed.
Should the instrument be contaminated by leak-
ing battery cells, the instrument has to be re-
turned for cleaning and inspection to the facto-
ry.
37
Battery Replacement
To Next Page
Loading...
Need help?
General
