Behringer MODEL D User Manual

33 MODEL D User Manual
8.2 Setting the MIDI Channel
Once installed in a Eurorack, the MIDI channel number is automatically set to
channel 1 (as the MIDI switches are no longer present.)
The MIDI channel can be changed using MIDI OX or a similar MIDI utility on
your computer to send MIDI SysEx commands directly to the MODEL D via the
USB MIDI connection. Here is a brief guide to the procedure (see the MIDI SysEx
pages in this manual for the actual SysEx codes sent to the MODEL D):
1. Disable the MIDI Channel Switches by sending the appropriate SysEx
command (even though the switches are no longer present).
2. Change the MIDI Channel by sending the appropriate SysEx command.

Behringer MODEL D Specifications

General

Built-in display	No
Housing color	Black
Power source type	DC, AC