Behringer X32 DIGITAL MIXER - Group;Bus Banks

15 X32 DIGITAL MIXER Preliminary User Manual
2.4 Group/Bus Banks (28) GROUP/BUS LAYERS – Select between DCA groups 1-8, Buses 1-8 or 9-16,
or Matrices 1-6 and the main center bus with these buttons. The currently
active layer will light.
(29) SENDS ON FADERS – Press this button to activate the Sends on Faders
function. See the Topic Guide for more details.
(30) SELECT – Press this button to select a DCA or bus (depending which layer
isactive) and allow it to be edited by the Channel Strip and Main Display.
(31) GROUP/BUS METER – This displays the signal level of the DCA or bus
(depending which layer is active). The Pre LED indicates that the bus is
sourced pre-fader, while the Comp LED indicates that compression is active.
(32) SOLO – Press this button to solo the DCA or bus.
(33) MINI DISPLAY – Information such as matrix/bus number,
nickname, input source and graphical icon are displayed on this color
LCDscreen.
(34) MUTE – Press this button to mute the DCA or bus.
(35) FADER – Use this to adjust the bus level. The faders will automatically
display the current status as layers and functions are changed.
(36) MAIN SELECT – Press this button to select the main bus for editing.
(37) CLEAR SOLO – Press this button to release all sources assigned to the
solobus.
(38) MAIN SOLO – Press this button to solo the main bus.
(39) MAIN MUTE – Press this button to mute the main bus.
(40) MAIN FADER – This fader adjusts the output of the main bus.
(30)
(29)
(31)
(36)
(37)
(38)
(39)
(40)
(32)
(33)
(34)
(35)
(28)