Behringer X32 DIGITAL MIXER - 6.3 XUF Specifications; Expansion Card Features; Performance Modes and Latency; Hardware and OS Requirements

38 X32 DIGITAL MIXER Preliminary User Manual
The 'Settings' screen allows the stream, ASIO, and WDM sound buers to be set.
Any detected drop outs will be documented as well, in which case a larger buer
should be selected.
6.3 XUF Specications
* depends on system performance and application
Expansion Card Features:
Interface MIDI
Audio input channels
24-Bit, 44.1/48 kHz
Audio output channels
24-Bit, 44.1/48 kHz
IEEE1394/FireWire 1 in x 1 out 32, 16 or 8 32, 16 or 8
HighSpeed USB 2.0 1 in x 1 out 32, 16 or 8 32, 16 or 8
DAW remote control Generic, HUI and Mackie Control emulation (via USB or FireWire)
Expansion Card Performance Modes (Channels):
Interface Minimum round-trip latency
IEEE1394/FireWire <7 ms*
HighSpeed USB 2.0 <12 ms*
Recommended Minimum Hardware:
Windows PC - Core 2 Duo CPU, 2 GHz
- USB 2.0 or IEEE1394 FireWire 400 port
- 1 GB RAM
Mac - 1.5 GHz CPU
- USB 2.0 or IEEE1394 FireWire 400 port
- 512 MB RAM
Recommended Operating Systems:
Windows: XP 32-Bit SP2 or higher, Win7 32-bit, Win7 64-bit
(XUFASIO drivers supplied)
MacOSX: 10.5 Leopard, 10.6 Snow Leopard,
10.7 Lion (CoreAudio compatible)
TIP: When using XUF under Mac OS and FireWire, the CoreAudio engine might
not always display the XUF as a MIDI interface automatically. In case you wish to
use the DAW remote control feature via FireWire, we recommend doing a manual
scan from the AUDIO/MIDI Setup dialog.