BeiJer BFI-H3 - Accessing and Changing Parameter Values - Oled Keypad; Resetting Parameters to Factory Default Settings - Oled Keypad

Beijer Electronics Frequency Inverter BFI-H3 KI00363B 2019-09
www.beijer.se www.beijer.no www.beijer.dk www.beijerelectronics.de www.beijerelectronics.com www.beijerelektronik.com.tr 22 (29
)
6.2 Accessing and Changing Parameter Values – OLED Keypad
Hold navigate button in
for >1 sec
Use up and down keys to
scroll to required
parameter.
Presss / release navigate
button when required
parameter shown
Use up and down keys to
edit parameter value.
6.3 Resetting Parameters to Factory Default Settings – OLED Keypad
Hold down the Up, Down,
Start and Stop keys for
>2s
The display shows P-Def.
Drive is returned to
factory settings. Press the
S
top key
Note: Parameters cannot be defaulted whilst P2-39=1 (parameter set locked).
Parameters can also be put to origin User Default Setting. Choose U-DEF instead by pushing UP-button
, DOWN-button and Stop-button at the same time.