BEKA BEKA-MAX User Manual

...a product of BEKA
7.3 Settings of the integrated control unit
All settings can be taken by means of the control element of the integrated control unit.
Remove the screw (1, fig.3) for the cover.
Remove the cover of the control unit (2, fig. 4).
Fig. 3: Fig. 4:
The display shows the current settings
of the integrated control unit.
The control element has several buttons
to do the settings of the integrated
control unit.
The OK button confirms the current
setting.
The ESC button deletes the
modification, the control unit operates
with the previous setting. The ESC
button also initiates an intermediate
lubrication.
If no button is pressed for more than 1
min. the control unit switches back to
status display. The entered password is
deleted.
1
2
Display
Control element
Control buttons
Confirm
Interruption
or intermediate
lubrication
progressive
state
cycle time
lubr. time
ERROR WARNING
Fehler
00:00:15
0:05:00
© BEKA 201 All rights reserved5!
11

BEKA BEKA-MAX Specifications

General

Brand	BEKA
Model	BEKA-MAX
Category	Control Unit
Language	English