© BEKA 201 All rights reserved5!
...a product of BEKA
8. Maintenance
Stop before maintenance or repairthe voltage feed, starting with .
Maintenance and repair work may only be done at of the central lubrication pump and pressurestandstill
less conditions. Check the surface temperature of the device, due to danger of burning by radiant heat.
Always wear heat-resistance gloves and protection goggles! Soiled or contaminated surfaces have to be
cleaned before maintenance works, wear protective cloths if necessary. Protect the device against
unintentional reactivation during maintenance and repair works!
Further information and technical details regarding the components can be found in the enclosed operating
manuals of the components.
9. Shut-down
· Relieve pressure of central lubrication pump!
· Switch off current!
· Have the pump separated from the current supply by a professional electrically skilled person!
· For demounting have all pipes and hoses deconnected from the pump and loosen all fixings.
10. Disposal
The disposal of the central lubrication pump and of the integrated control unit have to be
done according to national and international laws and regulations as well as professional
and proper.
The integrated control unit GIGA-tronic contains a battery. A professional and proper
disposal recycles batteries. They contain important raw materials.
Note!
34
To Next Page
Loading...
Need help?
General
