© BEKA 201 All rights reserved5!
...a product of BEKA
The operating data base is opened and the last registered errors or warnings are displayed.
Date and time for occuring error is shown as well as for the reset of error.
Section or group related errors and warnings are shown with section or group.
Fig. 25:
The display shows the number of current messages, message quantity and total number of messages.
If more error or warnings are shown, use the control buttons to scroll up or down. You can also display previous errors and
warnings (total number of message), by scrolling with the control buttons.
Press ESC to get out of the error and warning report.
7.6.6 Read out error or warning when using a dual line lubrication system
Errors and warnings are shown with a blinking display and plain text in the lower display.
· Press ok to see the errors and warnings.
Fig. 19:
message
Fehler kommt
under lubrication
section 1
Date:
Time:
107.1/178
20.01.14
10:41:24
dual line system
line
cycle time
pressurization
1
00:29:59
12:00
ERROR WARNING
Number of
current message
Quantity of
current messages
Total number of messages
21
To Next Page
Loading...
Need help?
General
