EasyManua.ls Logo

Beko BS207C - User Manual

Beko BS207C
160 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Local air
conditioner
User Manual
BS207C
EN FR NL DE
07M-8500143200-5220-02

Table of Contents

Questions and Answers

  • S
    Sherry GonzalesAug 6, 2025
    Why is my Beko BS207C Air Conditioner not working?
    • D
      daltonaliciaAug 6, 2025
      Your Beko Air Conditioner might not be working due to several reasons: * There may be no electricity. If this is the case, connect the appliance to a socket with electricity. * The overflow indicator light may be on, indicating that you need to discharge the water inside. * The ambient temperature may be too low or too high. This appliance should be used at a temperature between 7-35°C (44-95°F). * If in cooling mode, the room temperature might be lower than the set temperature. Try changing the set temperature. * If in dehumidification mode, the ambient temperature may be too low. Ensure the room temperature is greater than 17°C (62°F).
  • I
    ibarracoreyAug 19, 2025
    What to do if Beko BS207C cooling effect is not good?
    • J
      Joshua FarleyAug 19, 2025
      If your Beko Air Conditioner isn't cooling effectively, consider the following: * Direct sunlight might be entering the room. Try pulling the curtains. * Doors or windows might be open, there could be too many people in the room, or other heat sources might be present when in cooling mode. Close doors and windows and consider adding additional air conditioning. * The filter screen could be dirty. Clean or replace the filter screen. * The air inlet or outlet might be blocked. Clear any obstructions.

Summary

Safety Instructions

Features and Components

Features

Overview of the air conditioner's design, functions, and capabilities.

Components

Identification of the main physical parts of the air conditioner unit.

Control Setting

Control Panel Operation Instructions

Guide to operating the air conditioner using its physical control panel.

Remote Control Operation Instructions

Instructions for using the remote control to operate the air conditioner functions.

Protection Functions

Installation and Adjustment

Installation Guide

Step-by-step instructions for properly installing the air conditioner.

Drainage Instructions

Maintenance

Cleaning the Surface

Instructions for cleaning the exterior surface of the air conditioner.

Cleaning the Filter Screen

Procedure for cleaning the air conditioner's filter screen for optimal performance.

Cleaning the Upper Filter Screen Frame

Steps to clean the frame around the evaporator filter screen.

Unit Storage

Troubleshooting

Addendum

Installation Instructions

F-Gas Instruction

Regulatory information concerning fluorinated greenhouse gases in the equipment.

Specifications

Beko BS207C Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
Timer typeDigital
Noise level65 dB
Airflow (high speed)300 m³/h
Refrigerating mediumR290
Dehumidifier functionYes
Cooling capacity (max)6500 BTU/h
Dehumidifying capacity0.8 l/h
Timer duration (maximum)24 h
Air conditioner functionsCooling, Dehumidifying
Suitable for room area up to12 m²
Suitable for room volume up to33 m³
Cooling capacity in watts (max)1900 W
Cooling capacity in watts (nominal)- W
Cooling energy efficiency (EER, W/W)2.6
Heating energy efficiency (COP, W/W)-
Energy efficiency scaleA+++ to D
Energy efficiency class (cooling)A
Annual energy consumption (cooling)- kWh
Hourly energy consumption (cooling)0.7 kWh
Product colorWhite
Weight and Dimensions IconWeight and Dimensions
Depth328 mm
Width305 mm
Height668 mm
Weight19000 g
Package depth377 mm
Package width347 mm
Package height860 mm
Package weight22500 g

Related product manuals