Why does my Beko WTK84011W keep overflowing with foam?
If foam is overflowing from the detergent drawer of your Beko Washer: * Too much detergent is being used, so mix 1 tablespoonful of softener with ½ liter of water and pour it into the main wash compartment. * Ensure you are using the correct amount of detergent for the selected programme and load size. If using additional chemicals, reduce the amount of detergent.
What to do if my Beko WTK84011W Washer programme cannot be started?
If a programme cannot be started or selected on your Beko Washer, the machine may have switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will be cancelled.
Why does my Beko WTK84011W directly discharge the water it takes in?
If your Beko Washer immediately discharges the water it takes in, the draining hose might not be at the correct height. Connect the water draining hose as described in the operation manual.
Why does my Beko WTK84011W Washer have poor washing performance and laundry turns gray?
Poor washing performance with gray laundry in your Beko Washer can be due to: * Using too little detergent over time, so use the recommended amount for water hardness and laundry. * Washing at low temperatures for too long, so select the proper temperature. * Using too little detergent with hard water, so use the recommended amount. * Using too much detergent, so use the recommended amount.
Why is my Beko WTK84011W Washer programme time not counting down?
If the programme time isn't counting down on your Beko Washer: * The timer may stop during water intake until the machine takes in enough water. * The timer may stop during the heating step until the machine reaches the selected temperature. * The timer may stop during spinning due to unbalanced laundry distribution.
General| Door hinge | Left |
|---|---|
| Motor type | Brushless |
| Water fill | Cold |
| Control type | Rotary |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | No |
| Door opening angle | 170 ° |
| Outlet hose length | 1.3 m |
| Appliance placement | Freestanding |
| Feet adjustment | 15 mm |
| Drum capacity | 8 kg |
| Cycle time (max) | 218 min |
| AquaStop function | - |
| Delay start (max) | 9 h |
| Residual moisture | 53 % |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 72 dB |
| Noise level (wash) | - dB |
| Number of washing programs | 15 |
| Maximum washing temperature | 90 °C |
| Maximum water flow pressure | 1000 kPa |
| Minimum water flow pressure | 100 kPa |
| Cycle time (quick washing program) | 28 min |
| Current | 10 A |
| Connected load | 2200 W |
| Power plug type | Type G |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Power consumption (off) | 0.5 W |
| Power consumption (standby) | 1 W |
| Water consumption per cycle | 41 L |
| Energy consumption washing per cycle | 0.623 kWh |
| Energy efficiency index (EU 2017/1369) | 1.04 |
| Package width | 650 mm |
| Package height | 880 mm |
| Package weight | 69000 g |
| Hose diameter | 20 mm |
| Required tools | Standard tool box |
| Paper packaging weight | 10 g |
| Plastic packaging weight | 178 g |
| Harmonized System (HS) code | 84501190 |
| Expanded Polystyrene (EPS) packaging weight | 788 g |
Weight and Dimensions| Depth | 590 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 68000 g |
| Door opening diameter | 340 mm |
Safety guidelines for preventing harm to people and property, including child safety.
Precautions regarding electrical connections and hot surfaces during operation.
Selecting a location, removing packaging, and dealing with transport locks.
Connecting the water supply, drain hose, and electrical power safely.
Guidance on using detergents, softeners, and other washing agents.
Tips for energy saving and optimal washing based on fabric and soiling.
Solutions for programs not starting, water intake, and drainage failures.
To Next Page
