Belarus 952.4 - Page 27

BELARUS-920.4/952.4 Operating manual
27
rial units of measurement, as well as English, Spanish, Swedish, French, German, Italian, Dutch,
Portuguese and Russian among the available languages.
ATTENTION: ONLY DEALERS ARE ALLOWED TO CHANGE PARAMETERS OF
THE CONFIGURATION MENU.
Press the button 4 to call error (failure) list. Browse the list with the buttons 1 and 2.
When any error (failure) emerges during work, the display emits a sound signal, and a blinking
windows pops up with description of last errors (failures).
ATTENTION: THE ENGINE IS STOPPED BY TURING THE STARTER AND IN-
STRUMENT SWITCH TO “OFF” POSITION.
Table 4 - List of parameters of graphic and four-section indication of engine operation.
Parameters
Fou
r
-section
p
resentatio
n
Graphic presen-
tatio
n
Symbol
1.
Voltage directly on the connec-
tion terminals of the information
dis
p
la
y
, V
 
2.
Voltage at battery terminals
measured by electronic control
unit of en
g
ine, V
 
3. Fuel consumption
 
4. Incoming air pressure

5. Oil pressure in engine
 
6.
Coolant temperature in engine
 
7.
Engine oil temperature
 
8.
Fuel temperature

9. Air temperature at inlet pipe
 
10. Accelerator position, %

11. Coolant level in engine, %

12. Torque use, rpm

13. Engine speed (rpm)
 
https://tractormanualz.com/