Belarus 952.4 - Maintenance; Tractor Maintenance

BELARUS-920.4/952.4 Operating manual
42
3 MAINTENANCE
3.1 Maintenance of tractor
Kinds of scheduled maintenance, MS procedure, contents of scheduled maintenance opera-
tions (MS), as well as names, brands, quantity, intervals of change of fuels and lubricants of
“BELARUS–920.4/952.4” tractor chassis are described in the operating manual 900-0000010 OM
supplied with your tractor.
Kinds of scheduled maintenance, MS procedure, contents of scheduled maintenance opera-
tions (MS), as well as names, brands, quantity, intervals of change of fuels and lubricants of
D-245.43S3A/D-245.5S3A engines installed on the BELARUS-920.4/952.4 tractors are described
in the engine operating manual 245S3A-0000100 OM supplied with your tractor.
This manual provides only description of those operations that, due to variation in design of
“BELARUS-920.4/952.4” tractors from models “BELARUS-920.3/952.3” differ in maintenance
operations for the “BELARUS-920.3/952.3” tractors or are not performed for “BELARUS-
920.3/952.3”.
Before you carry out any maintenance work, raise, then lock the tractor hood and, as neces-
sary, remove the both sides (Figure 3.1). To do that, proceed as follows:
- pull the handle 2 and raise the hood 1 by the grip 3;
- lock the hood 1 with the arm 4;
- make sure that the hood 1 is securely locked in the raised position;
- as necessary, remove the left side 6 and the right side 5, first unscrewing three mounting
bolts 7 on each side.
To provide access to the expansion tank of the engine cooling system, open the hatch 8
(Figure 3.1), first unlocking the lock 9.
DO NOT OPEN THE HOOD 1 (FIGURE 3.1) AND THE HATCH 8 AT THE SAME
TIME.
Figure 3.1 Mechanism of opening the hood and the hatch, locking the hood open
https://tractormanualz.com/