BELARUS-920.4/952.4 Operating manual
3
The operating manual is intended for study of arrangement, operating rules and mainte-
nance of the tractors Belarus 920.4 / 952.4.
The present manual is a supplement of operating manual 900–0000010 OM and should be
enclosed together with this manual.
Read carefully through this manual, operating manual 900–0000010 OM, operating manual
for diesel engine 245 S3A – 0000100 OM, enclosed with your tractor. It will help you to get ac-
quainted with methods of proper operation and maintenance.
Failure to follow this instruction can result in operator’s injuries and tractor breakings.
Tractor operation, its maintenance and repairing must be carried out only by the specialists,
acquainted with all its characteristics and informed about necessary safety requirements to prevent
accidents.
Due to constant development of tractor, changes, which are not shown in the present oper-
ating manual, can be introduced into design of some assembly units and parts.
All unspecified changes, introduced into structure of any assembly units by the consumer,
release the manufacturer from responsibility for subsequent operator’s injuries and tractor break-
ings.
Accepted abbreviations and legend
ECM – Engine control module;
FPFV – frequency probe of fuel volume
ID – Integrated display;
MD – Multifunction display;
IDPC – Integrated display program console;
OM – Operating manual.
Other abbreviations and legend are given in Operating manual 900–0000010 OM.
https://tractormanualz.com/
To Next Page
Loading...
