Need help?Do you have a question about the Belimo EPIV Series and is the answer not in the manual?
General| Product Type | Electronic Pressure Independent Valve (EPIV) |
|---|---|
| Actuator Type | Electronic |
| Control Signal | 2 to 10 VDC, 4 to 20 mA |
| Supply Voltage | 24 VAC/VDC ±10% |
| Valve Sizes | 1/2" to 6" |
| Pressure Range | 232 psi |
| Temperature Range | -7°C to 121°C |
| Flow Characteristic | Equal Percentage |
| Communication Protocol | Modbus RTU, BACnet MS/TP |
| Housing Protection | IP54 |
| Connection Type | Threaded, Flanged (depending on model) |
| Override | Manual override with handwheel |
Provides detailed technical specifications for the EPIV product range.
Explains EPIV's use of a flow sensor and electronic controller for defined flow allocation.
Overview and models for the EP..R+MP series of pressure independent control valves.
Overview and models for the P6..W..E-MP series of pressure independent control valves.
Lists the main sections covered in the databook.
Presents a summary table of EP..R+MP models with key specifications.
Details electrical specifications and flow measurement principles for the EP..R+MP series.
Covers functional parameters, safety aspects, and materials used in the EP..R+MP valve.
Describes product features, mode of operation, and flow rate curves for the EP..R+MP series.
Presents a summary table of P6..W..E-MP models with key specifications.
Details electrical specifications and flow measurement principles for the P6..W..E-MP series.
Covers functional parameters, safety ratings, and materials for the P6..W..E-MP valve.
Describes product features, mode of operation, and flow characteristic curves for the P6..W..E-MP series.
Explains control characteristics, block diagrams, and definitions related to EPIV operation.
Details creep flow suppression for different DN sizes in EPIV valves.
Covers features like adjustable parameters, hydraulic balancing, and manual override.
Lists accessories, service tools, and provides electrical installation and wiring guidance.
Details MP-Bus functions, connection diagrams, and power topology.
Explains sensor connections and override control with relay contacts.
Describes operating controls, indicators, and pushbuttons on the EPIV actuator.
Provides guidance on installation, water quality, maintenance, flow direction, and earthing.
Specifies flow-calming section dimensions for accurate flow measurement.
Explains valve selection and minimum differential pressure calculation.
Presents dimensional drawings and weight data for EP..R+MP series valves.
Presents dimensional drawings and weight data for P6..W..E-MP series valves.
Provides step-by-step visual instructions for mounting EP..R+MP EPIV.
Illustrates wiring and connection diagrams for AC/DC 24V and MP-Bus operation.
Details installation procedures and safety precautions for P6..W..E-MP EPIV.
Shows torque specifications for connections and illustrates connection points.
Illustrates recommended installation orientation and wiring for AC/DC 24V and MP-Bus.
Details connections for sensors and MP-Bus communication for P6..W..E-MP.
Lists contact details for Belimo offices across various regions in Asia Pacific.
Categorizes Belimo products and highlights support services like warranty and delivery times.
To Next Page
