19
Adjusting the buzzer tone
• Press button 2 until the “LX” (X=1, 2 or 3) flashes on the right two digits.
• Set the tone using buttons 1 and/or 3 to set “L1”, “L2” or “L3”
Note:
Default tone is L3.
Child lock activation/ deactivation
When any adjustment mode is not active, press and hold button 3 about 5 seconds, to
activate/deactivate the key lock, icon appears/disappears on the display
accordingly.
When the child lock is activated, the buttons get locked. Pressing the buttons will
have no effect but it will be heard two beep signal.
Notice! :
In case of main power loss for a short time (about 1.5 minutes), timer maintains
its status.
Child lock status and buzzer tone are memorized independent of the power loss
duration.
8 FUNCTION MODEL
To Next Page
Loading...
