28
11 FUNCTION MODEL
In the case of an error message
If these errors cannot be solved by tapping the button, try to disconnect
the oven from the mains and connect it again after 2 minutes.
If this does not work, contact the nearest service centre.
PROGRAMMABLE OPTIONS
Acoustic signal
There are three acoustic tones that can be selected.
Touch the key for 5 seconds, the time display shows the currently valid tone as
“TN 1” (high) or “TN 2 (medium)” or “TN 3 (low)”. The valid tone can be changed
by touching the key within 7 seconds of the last setting.
The default tone is “TN 1”.
Key sound
There are three key sound options that can be selected.
Touch the key for 5 seconds, the time display shows the currently valid key tone
as “bt tn” (beep tone) or “cl tn” (click Tone) or “nt” (no tone). The valid key sound
can be changed by touching the key within 7 seconds of the last setting.
The default key sound is “bt tn”.
Time of day 24h/12h mode: the default mode is 24 hours
For the 12h AM/PM mode, touch both the and keys for 5 seconds. The
modes change and an acoustic signal occurs. Vice-versa perform the same action.
To Next Page
Loading...
