INSTALLATION
Installation above an oven
Refer to the manufacturer’s instructions
for clearances above the oven.
We recommend a 20mm gap between the
bottom of the hob and appliance.
Use a wooded dividing panel required if
beingttedaboveadrawer.
In the case of a pyrolytic oven
If installing the hob above a pyrolytic
oven, additional provision for air
circulation / ventilation may be required.
Due to the excessive temperatures at-
tained during pyrolysis, using the hob at
the same time may cause the thermal
safety device within the hob to operate.
To Next Page
Loading...
