Belling IH6013 - Page 8

USING THE HOB
Overheat Pan Protection
The hob is equipped with additional safety
systems that help to prevent cookware
from overheating, providing an additional
level of safety not available on conven-
tional hobs such as gas and ceramic hobs.
Helpsreducetheriskofrethroughmis-
use use of hob.
If there is an overheat situation the hob
will display the appropriate code detailed
in the “hob status codes table”.
Approx Glass
Temperature
o
C
Hob Action
190
Automatic Power
Reduction
220
Power Automatically
Shuts down
Note:
The safety temperature control of the
pansisonlypossiblewithqualityatbot-
tomed pans suitable for induction cook-
ing; Poor quality pans can create air gaps
between the glass and the pan, which
affects the accuracy of the temperature
control.
Residual Heat Indicators
If glass surface is above 65
o
C when the
cook zone is switched off an “H “will be
displayed in the cook zone display until
the glass surface drops below approx
55
o
C.
This feature not only warns you against
hot surfaces but also indicates that there
is residual heat which can be used as
temporary warm zone.
Note:
The cook zone itself does not heat up, but
the ceramic glass does get hot because
of the hot pan conducting heat back onto
the hob glass.
Auto Stand by
The Hob will automatically switch off if
left (with pan) on for an extended period
of time, see maximum running times
below.
Power Level
Maximum
Operation Time
hours
1 10
2 5
3 5
4 4
5 3
6 2
7 2
8 2
9 1
P (Power Boost) Max 10mins