BELL+HOWELL WP20 Splash3 - Setting the Date and Time

9
press the OK button to launch the submenu.
3: Press the Up/Display or Down/Mode button to select the desired
language and then press the OK button to confirm the setting.
Setting the Date and Time
1: Turn the power on, press the MENU button to display the menu.
2: Press the Left or Right button to select [Capture Setting] Menu.
3: Press the Up or Down button to select [Date] then press the OK button
to launch the submenu.
4: Press the Up or Down button to select [Set Date] then press the OK
button to launch the dialog box.
5: Press the Up or Down button to change the highlighted value. Press the
Left or Right button to move the cursor between settings.
6: Press the OK button to confirm the settings.
Note: The date and time can be only added to still images by setting the
function [Date] in the Capture Setting menu.