BELL+HOWELL WP20 Splash3 - Recording Audio; Playback; Playback Still Image

14
4: Press the SHUTTER again to end the recording. If the memory is full the
video camera will stop recording automatically.
5: Press the MENU button to display the menu, including Size, Image
Setting.
Do not remove the card when video recording. Doing so may corrupt
your video and picture files.
Recording Audio
1: Turn on the camcorder and set the camera to audio record mode ( ).
2: Press the SHUTTER button to start recording.
3: Press the SHUTTER button again to end the recording. If the memory is
full, the camera will stop recording automatically.
4. Playback
Playback still image
1: Press the PLAYBACK button to playback mode.
The latest recorded file appears on the LCD screen. If there are no
images stored, a message [No File Exist] appears.
2: Press the LEFT or RIGHT buttons to preview the previous or next image.