Q-START (Quick-Start Mode)
Unit will bypass any form of a power-up test sequence when
powered-up and will display
CITY or HIGHWAY depending
upon the mode retained in memory. Unit is ready for
operation.
TUTORIAL MODE
The tutorial mode allows you to become more familiar with
all audible and visual alerts. To engage this mode, press the
aud and cty buttons simultaneously when the unit is on.
The message “TUTORIAL” appears in the display followed by
the audio and corresponding Text Message for “LASER”,“Ka
AUDIO”,“K AUDIO”,“X AUDIO”, sample Radar alert (K
band signal ramping from weak to strong) and “SAFETY
WARNING SYSTEM SAMPLE ALERTS”.Three samplesws
™
messages are then presented in the display along with the
corresponding Digital Voice Message:
Sample 1 “
ACCIDENT AHEAD”
Sample 2 “HIGHWAY WORKCREW AHEAD”
Sample 3 “POLICE IN PURSUIT”
While sample messages are playing you can access the
complete list of sws
™
messages by pressing the cty button to
move forward in the list.“MSG 1” will appear in the display
confirming your selection (to move backward in the list,
press the drk button). Pressing the aud button allows you to
listen to the sws
™
message while viewing it in the display.
Press the cty button again to step to the next message; press
the aud button to review, and so on. This allows you to
review all 60 messages.
To exit Tutor i a l Mode, pres s t he pwr button and your unit
will be on and ready to receive signals.
Set and Forget Memory
Any time bel 990 International is turned off or unplugged
from the cigarette lighter socket, all feature settings you have
selected are retained in the unit’s memory. Set and Forget
Memory eliminates the need to reset your preferred feature
settings each time your unit is turned off and then back on.
To Next Page
Loading...
