Beltronics RX 65 - Page 18

Detail$ · ofProgral1lRling
Bands
Band-=:ALL
In this setting all radar, laser, and SWS
frequencies are monitored. This is the
factory setting, and it is highly
recommended that you use your
RX65 in
this mode.
In this setting,
RX65 will warn you with an
audible alert,
and associated text message
stating
which band is turned off(i.e. "SWS
OFF"). This warning is displayed during the
start
up sequence (standard or fast).
WARNING: Only modify bands if you
are absolutely certain that there are no
traffic radar units using that specific
band in your area.
16