User's Tip
You canleave the QuickMount bracket in
place
on
your windshield, and easily remove
the
RX65
bypressing the adjustment button
and sliding it offthe mount. Again,
be
sure
to position the bracket
where
it
won't
present a hazard in the event
of
an
accident.
Additional mounts are available.
Windshield
QuickMount
RX65's QuickMount windshield bracket
is
designed for unobtrusive and hassle-free
mounting.
Caution!
Afew vehicles (including some Porsches)
have windshields with a soft anti-lacerative
coating
on
the
inside surface. Use
of
suction
cups will permanently mar this coating.
1 Depress
the
QuickMount button
on
the
Consult your dealership
or
the vehicle
top ofRX65 (by the
word
BELTRONICS)
owner's manual to determine
if
yourwind-
and slide the QuickMount bracket into the shield has this coating.
slot until it
is
locked into
th~
posi~ion
which
~
best fits
the
angle
of
yourwmdshield (there
~
..
:.
are four settings available). For extremely
~3~~@~~~~_
horizontal
or
extremely sloped windshields,
the QuickMount bracket can
be
bent.
2 To adjust
RX65
on
your windshield,
use the QuickMount adjustment button
located
on
the
top
of
the
RX65,
and slide
RX65
forward
or
backward to obtain a level
horizontal position.
To ensure that the suction cups adhere to
the windshield firmly,
be
sure to keep
both
your windshield and the suction cups clean.
When installed and adjusted properly, the
back
top
edge
of
the
RX65
should rest
solidly against yourwindshield.
7
To Next Page
Loading...
