INTRODUCTION
SHADOW TECHNOLOGY
®
II
SELECTABLE FEATURES
Thank you for purchasing a BELTRONICS Remote installation
Radar/Laser/Safety detector.
Your VECTOR LR Remote detector provides all the benefits of full
coverage Radar and laser detection as well as detection of the Safety
Warning System
™
— all in the discretion of a concealed installation.
To ensure maximum benefit from your new VECTOR LR Remote,
please read all operating instructions completely as well as the
accompanying installation instructions enclosed.
VECTOR LR REMOTE contains Shadow Technology
®
II, making it
undetectable to the Interceptor VG-2 or any other Radar Detector
Detector (RDD). Only Shadow Technology
®
II has been consistently
proven undetectable to the Interceptor VG-2.
1. Auto-Mute On/Off
Select Auto-Mute
ON
for several X,K, Super Wideband Ka audio alerts
followed by a “clicking” tone to quietly inform you for the duration of
the signal. Auto-Mute
OFF
provides a continuous series of X,K, Super
Wideband Ka audio alerts. Factory setting is Auto-Mute
OFF
.
(see page 9)
2. Safety Warning System
®
(sws
™
)
VECTOR LR Remote detects encoded signals from sws
™
transmitters
and provides distinct alerts for: Highway Construction/Maintenance,
Highway Hazard Zones, Weather Related Hazards, Emergency/Slow
Moving Vehicles and Travel/Convenience Information.
For a complete description of sws
™
of audio and visual alerts, see page 16
3. X/K/Ka Band On of Off
Select “X
ON/X OFF”, “K ON/K OFF” or “Ka ON/Ka OFF” depending upon
your driving environment and selectivity requirements. Factory setting
is X/K/Ka
ON. (see page 9).
4. Four Ka Narrow Frequencies
Select Ka Narrow sweeps of 33.8 GHz, 34.36 GHz, 34.7 GHz or
35.5 GHz. Narrow Band Ka frequencies are especially useful in areas
where you know a specific Ka Narrow sweep is used. Factory setting is
Super Wideband Ka ON. (see page 9)
2
To Next Page
Loading...
