9
Once engaged, weak X, K or Super Wideband Ka
signals encountered will produce no audible alerts until
the signal strength reaches a preset level. Visual alerts
are processed the instant an X, K or Super Wideband
Ka signal is detected, keeping you quietly informed.
Pressing
CTY a third time returns you to highway mode;
two beeps and the illumination of the green
H/C LED
confirms highway mode.
Reset to Factory Settings
You can reset your unit to factory settings for volume,
DRK, AUDIO, CITY and Selectable Features. With the unit
OFF press and hold the AUD and CTY buttons, then
press the
PWR button. Two “beeps” will confirm factory
settings are reset. Your unit is now
ON and ready for
operation.
Selectable Features
Auto-Mute, Safety Warning System
®
, X, K, Super
Wideband Ka
ON/OFF and the four Ka Narrow frequencies:
33.8 GHz, 34.36 GHz, 34.7 and GHz, 35.5 GHz, are all
features that may be selected
ON or OFF, depending
upon your preference.
Auto-Mute On/Off
When activated, unit will provide several X, K, Super
Wideband Ka audio alerts followed by a “clicking” tone
to keep you quietly informed for as long as the signal is
present. The clicking becomes more rapid as the
strength of the Radar signal increases. Auto-Mute
enables you to conveniently monitor extended
encounters without having to manually mute or adjust
the volume setting.
Note – because of their urgency, Laser alerts are not
affected.
To Next Page
Loading...
