7. X/K/Ka/sws
™
Band Visual Alerts : the alert
received is confirmed by the illumination of the
appropriate
LED.
8.
Four-LED Display: LEDs illuminate sequentially to
confirm signal strength of Radar signals. A different
alert pattern confirms detection of Laser and Safety
Warning System
®
(sws
™
).
9.
Audio Speaker: all audible alerts are emitted from
this location.
10 .
Antenna Sensor: contains the electronics which
detect police Radar. This antenna sensor installs within
the engine compartment of the vehicle.
11.
Antenna Face: receiving portion of the antenna sensor
must have a clear, unobstructed view of the road ahead.
12 .
Front Laser Sensor: with 11’ cable mounts onto the
windshield using the supplied suction cup.
13 .
Rear Laser Sensor: with 17’ cable mounts to rear
window of vehicle.
14 .
Windshield Accessory Cover: remove the cover to
insert the suction cup mount.
15 .
Optical Opening: Laser signals are received at this
side of the Laser sensor which must have a clear,
unobstructed view of the road ahead.
Description of Features
Power-on Test Sequence
Each time your unit is turned on, alerts for Laser, X, K,
Ka and Safety Warning System
™
are presented briefly.
This is immediately followed by the status of the four
Selectable Features:
1. Auto Mute – a clicking tone confirms if feature is
engaged.
2. Safety Warning System
®
– illumination if the green
“S”
LED confirms if feature is engaged.
3. X/K/Ka Bands – illumination of the appropriate
LED
confirms if band is activated. Full illumination of four
signal strength
LED, coupled with the illumination of
the Ka
LED confirms Super Wideband Ka mode.
5
To Next Page
Loading...
