LC8810 User Manual V1.0
11
Mounting the LC8810 to the wall with the VESA mounting brackets
Allow at least 3 inches of space from the top of the unit and 6 inches from the sides to
allow proper ventilation. See the picture below:
Picture 6
The LC8810 is a fanless and ventless unit. Heat is dissipated through the metal case.
So, allow at least 6 inches of space from the top of the unit and 3 inches from the sides
for proper ventilation. It’s recommended to mount the unit vertically to maximize
ventilation effect. Vertical mounting stands are available from Bematech.
To Next Page
Loading...
General