LC8810 User Manual V1.0
12
Replacing Hard Disk Drive
Replacing hard disk drive (or SSD) on LC8810 is a very easy task. No tools are required to
perform this action. Before starting the replacement process, power down your LC8810 and
disconnect it from the wall outlet. Wearing an anti-static wristband is preferable whenever
working with sensitive electrical equipment.
1. Unscrew two thumbscrews located at the side of the unit.
2. Slide out the Hard Disk metal cover.
3. Slide the HDD tray button to the left and lever will be released.
To Next Page
Loading...
General