Bematech SB9015F - Page 18

17
AHCI Setting: Under < Advanced >, select <SATA Mode Selection>.
Main Advanced Chipset Boot Security Save & Exit
Enable or disable SATA
Device
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
SATA Controllers(s) Enabled
SATA Mode Selection IDE
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Hardware Monitor Check: Under < Advanced >, select < F81866 H/W Monitor >.
Main Advanced Chipset Boot Security Save & Exit
PC Health Status
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
CPU temperature +39 C
System temperature +42 C
Sys_FAN Speed 6602 RPM
Vcore +1.128 V
VCC5V +5.043 V
VCC12V +12.058 V
+1.5V +1.524 V
VCC3V +3.374 V