19
Security Tab
Set the Supervisor or User password first to use the security features.
Main Advanced Chipset Boot Security Save & Exit
Password Description
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
If ONLY the A
dministrator’s password is set,
then this only limit access to Setup and is only
asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will have
Administrator rights
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
Save& Exit
Restore the Factory Default Setting: Under <Save & Exit>, select < Restore Defaults >
and select <Yes>.
Main Advanced Chipset Boot Security Save & Exit
Save Changes and Reset
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
To Next Page
Loading...
