9
WARNING: Repair or replace damaged or worn extension cords immediately
Select the appropriate extension cord gauge and length using the chart to your right
When operating a power tool outdoors, use an outdoor extension cord marked
“W-A” or “W”. These cords are rated for outdoor use and reduce the risk of
electric shock.
WARNING: Keep the extension cord clear of the working area. Position the
cord so it will not get caught on the workpiece, tools or any other obstructions
while you are working with the power tool
MINIMUM GAUGE (AWG) EXTENSION CORDS (120 V use only)
Ampere Rating Total Length in Feet
More
Than
Not More
Than
7.5 m
(25')
15 m
(50')
30 m
(100')
45 m
(150')
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Applicable
SYMBOLS
WARNING: Some of the following symbols may appear on the saw.
Study these symbols and learn their meaning. Proper interpretation of these
V
VOLTS
Three-phase alternating current
with neutral
A
Amperes Direct current
Hz
Hertz
n
o
No load speed
W
Watts Alternating or direct current
kW
Kilowatts Class II construction
ųF
Microfarads Splash-proof construction
L
Litres Watertight construction
kg
Kilograms
Protective grounding at grounding
terminal, Class I tools
To Next Page
Loading...
Need help?
General
